From your kitchen table to your new smile

After checkout, a licensed dentist in your state reviews your photos. Your impression kit ships only after that review.

An in-person examination with a dentist licensed under chapter 466, Florida Statutes, is recommended before beginning telehealth treatment in order to prevent injury or harm.

Impression kit box with trays, putty, a shade guide and printed instructions
The kit comes to you
Order online and your kit arrives by USPS in 3 days or FedEx overnight, with the shipping paid by us.
Take your impressions, mail them back and send photos with the shade guide
You mold your teeth
Send us photos, get our go ahead, mail the trays back with the prepaid label.
Your appliance arrives with cleaning foam and a mirrored storage case
We build and ship
Up to 6 to 10 business days at the bench, then another 3 days by USPS or overnight by FedEx to your door.

Before you open the putty

Skip the mold if your gums bleed, if a filling or a crown is loose, if a tooth moves, or if a tooth is badly decayed. Have a dentist look at all of it first, because the putty grips hard and it can pull a loose crown, a loose filling or a badly decayed tooth out with it.
Taking an impression of the upper teeth at home with the Smile Lab USA kitRead the full impression guide

What happens after you order

Orders before 5 PM Eastern ship the same business day, later ones the next morning.
The kit reaches you by USPS in 3 days or FedEx overnight, and the return label is prepaid.
Three things keep your order moving once the kit is open
  • Get the first mold approved before you mail anything
  • Mold the upper arch and the lower arch, we need the bite
  • Email four photos with the shade guide held beside the gap
When your trays land, a technician checks them again and calls if it is off.
The build takes 6 to 10 business days, then the box ships with its own tracking number. The eight notes below cover everything that usually slows an order down at the bench.
Missing teeth before and the finished smiles after, side by side

Eight things that keep it smooth

Eight short notes that keep your mold clean and your order moving along.
1. Watch the video first
Ninety seconds, and you will know how the putty behaves.
2. Brush and rinse
Plaque and crumbs print into the mold.
3. Do both arches
We need the upper and the lower for your bite.
4. Get the first one approved
Mail an unapproved pair and a new kit costs $40.
5. Send four photos
Front, both sides and the gap.
6. Shoot in bright light
Shade guide beside the gap, someone else holding the phone.
7. Pack both trays together
One sealed box, our label, the carrier printed on it.
8. Watch the clock
After 5 PM Eastern it ships the next business day.

Video

Brush

Both arches

Approval
Photos
Lighting
Packing
Cutoff

Watch the video first

Ninety seconds, and you will know how the putty behaves.

Brush and rinse

Plaque and crumbs print into the mold.

Do both arches

We need the upper and the lower for your bite.

Get the first one approved

Mail an unapproved pair and a new kit costs $40.

Send four photos

Front, both sides and the gap.

Shoot in bright light

Shade guide beside the gap, someone else holding the phone.

Pack both trays together

One sealed box, our label, the carrier printed on it.

Watch the clock

After 5 PM Eastern it ships the next business day.

Not sure which one you need

Three families, and most cases land in one of them.
Friends laughing together over lunch

Cosmetic

Covers gaps and flaws, not for eating. Snap-on veneers, pontic retainers.
Snap-on veneer appliance, top arch, white natural-looking teeth
Essix retainer with a built-in replacement tooth for a missing gap
Woman laughing over coffee at her kitchen table at home

Functional

Replaces teeth and takes chewing. Flippers, partial dentures.
Two flipper tooth appliance examples - metal clasp style and front two-tooth style
Two partial denture appliance examples - metal clasp style and gum-colored acrylic style
Woman laughing while holding a clear night guard

Protective

Guards against grinding and drifting. Night guards, Essix retainers.
Clear Essix retainer held in gloved hands, labeled Essix Clear Retainer
Clear night guard held in a gloved hand, labeled Night Guards
Write down which teeth are gone and what you want back. A technician replies inside one business day, in English or Spanish, whichever you prefer.
  • We read the case and say what we see
  • We name the appliance that fits the budget
  • We answer on timing, delivery and care
Book a free consultation
Cosmetic
Covers gaps and flaws, not for eating. Snap-on veneers, pontic retainers.
A set of snap on veneers for the upper teeth
Essix retainer with a pontic tooth held in a gloved hand
Functional
Replaces teeth and takes chewing. Flippers, partial dentures.
Two acrylic flippers that replace one or two front teeth
Flexible partial dentures held in gloved hands
Protective
Guards against grinding and drifting. Night guards, Essix retainers.
Clear Essix retainer held in a gloved hand
Clear night guard held in a gloved hand
Write down which teeth are gone and what you want back. A technician replies inside one business day, in English or Spanish, whichever you prefer.
  • We read the case and say what we see
  • We name the appliance that fits the budget
  • We answer on timing, delivery and care
Book a free consultation

Inside the kit

Everything for two clean molds, with a spare batch of putty for a second try.
  • Two sets of trays and four sets of putty
  • A 16 color shade guide and printed instructions
  • A prepaid return label, video steps and free video help
Impression kit with two sets of trays, four sets of putty, printed instructions and a 16 color shade guide
Everything for two clean molds, with a spare batch of putty for a second try.
  • Two sets of trays and four sets of putty
  • A 16 color shade guide and printed instructions
  • A prepaid return label, video steps and free video help

Impression kit with two sets of trays, four sets of putty, a shade guide and a prepaid return label
2 SETS OF TRAYS4 SETS OF
PUTTYPREPAID
RETURN
LABEL16-COLORS
SHADE GUIDEDETAILED INSTRUCTIONS
TO CREATE IMPRESSIONS

Taking the mold, step by step

  1. Brush and rinseAnything left on a tooth prints straight into the mold.
  2. Pick the trayDry fit each size first. It should clear the teeth without squeezing.
  3. Mix the puttyWork it until the color runs uniform, then fill the tray.
  4. Seat itEase it over the arch and hold steady until the putty firms up.
  5. Read the resultA sharp edge on every tooth, a clean gum border, no air pockets.
  6. Ship itDrop it in the box with the label we sent and the build starts.

Never mold over a wobbly tooth, sore gums or a cavity. Have a dentist look at that before the putty goes in.

How we match your color

Close-up photos we use to match the shade of your appliance

Lab technicians work off your photos and the shade guide you held beside the gap. They match the tooth tone, the gum tone and the shape of the neighbors, because a flawless white tooth next to lived in ones is what gives the whole thing away.
Close-up photos of a finished appliance next to the natural teeth
Lab technicians work off your photos and the shade guide you held beside the gap. They match the tooth tone, the gum tone and the shape of the neighbors, because a flawless white tooth next to lived in ones is what gives the whole thing away.

If it does not sit right, we fix it

Satisfaction guarantee stamp from Smile Lab USA

Most appliances fit straight out of the box. When one needs a touch, that is normal.

For 30 days you get unlimited adjustments.

If adjusting is not enough, we remake the appliance.

Satisfaction guarantee stamp from Smile Lab USA
Most appliances fit straight out of the box. When one needs a touch, that is normal.
For 30 days you get unlimited adjustments.
If adjusting is not enough, we remake the appliance.

Three things in every box

Cleaning foam
Made for the material your appliance is cut from
Smile Lab cleaning foam bottles with their boxes
Care case with a mirror
Somewhere safe to park it
Black storage case with a mirror for your appliance
Your 3D model on file
Every appliance after your first is cut from it, needs no new kit and is 30 percent off. A spare in the same order is 30 percent off too.
Digital 3D model of your teeth kept for easy reorders

Questions about the process

Time from order to delivery

Figure 6 to 10 business days. The kit takes 2 to 3 each way and the build takes 3 to 7.

What a smile lab teeth impression is

It is a mold of your upper and lower teeth, taken at home with a tray and putty. Your appliance is cut from it, which is why we check a photo first.

If the mold comes out wrong

Send a photo and we answer the same day. The kit holds spare putty for another go, and a new kit is $40.

Whether a dentist has to be involved

No office visit. A licensed dentist in your state reviews your photos after checkout. Keep your checkups, because only a dentist sees what is happening under the gum.

Getting it faster

Rush manufacturing is $150. Your mold goes to the bench the day it lands, and the appliance is done in 3 to 4 business days. Rush delivery runs $45 for one leg, $90 for two, $135 for all three.

If you already have molds

Send them and they become your model on file. Scans, printed models and stone models work, if they show your mouth today.

Book a free consultation